1.
Her real first question was, where was the entity? Was there some way she could tell, or would she have to do element balances with the same attention to detail that Delos had? Ava had far more interest in penetrating the native data network than worrying about element balances seven decimal places out
2.
“Wholeness, or one, when divided by seven yields a repeating decimal, as does three into one
3.
“That must be four hundred of their years, about twenty five decimal Earth years
4.
’ Yeeng's are ten thousands of their years in base six,” Alan reminded him, “about two hundred twenty nine decimal Earth years
5.
zeroes after the decimal in the probability of this happening with
6.
n) High competitiveness in the prices and quality of the products through the elimination of the fixed cost and power of valorization with countless decimal fractions
7.
a decimal point to show that it is less than one
8.
All you need to do is convert that string back to decimal, which gives us 100
9.
The standard colour coding method for resistors convention standard, R is used to represent a decimal
10.
uses a different colour to represent each number 0 Because of problems in seeing the decimal point in to 9: black, brown, red, orange, yellow, green, blue, some printed texts, the 3 letters, k or M or R, are purple, gray, white
11.
used in place of the decimal point
12.
Decade any other decimal digit, you may press reset switch counter iC CD4026 or CD4033 (whichever available)
13.
for a fact (we call such facts mathematical proofs) that the decimal expansion of π is non-terminating and non-repeating
14.
wondering about decimal numbers, they are
15.
Align decimal points and be consistent with the number
16.
of decimal points used
17.
Usually 1 or 2 decimal points are
18.
It is helpful to have intervals defined to one more decimal place than the data collected
19.
While we are at it, what about a title for the report? Why doesn’t the account balance print with a decimal point and without those leading zeroes? Lastly, why do the names begin in lower case letters rather than upper case and what would happen if the account file had no records or didn’t exist at all? These are all valid questions, which need resolving
20.
is used to reformat the balance so that it will have the appropriate dollar sign, commas if the amount is a thousand dollars or more as well as the decimal point in all cases
21.
The decimal amount will always print with this mask
22.
Remember that we need one character for the $ and then one each for the six digits to the left of the decimal point
23.
10, but the computer will actually have 0310 for this field without the decimal point, and it is understood to be there
24.
In our programs we don’t need to specify leading zeroes if fields are defined integer or decimal
25.
only allows for 4 digits to the left of the decimal point as well as on the right since there is only room for a single digit to the right of the decimal point
26.
with the definition of the field mean that only a limited number of characters are acceptable here, namely integers, the negative sign and the decimal point
27.
Note that the operator needs to enter the decimal point if the amount involves cents, otherwise the number will be assumed to have no decimal digits
28.
We could have gotten around keying the decimal point by allowing movement to the decimal portion of the amount with a tab
29.
However, since either way involves a keystroke, we chose the decimal point
30.
This will be the makeup of our number in base 10 and it will apply to any number we can consider in the decimal system
31.
ented in memory by bits represents the decimal 8
32.
The %m specification will be replaced by the month as a decimal number between 01 and 12 and so on
33.
the trinary into decimal but all that did was to reveal that the
34.
decimal and p intend to specify the no
35.
debit column decimal precision should be 2 with comma format
36.
Credit column decimal precision should be 2 with comma format
37.
No one deserves or should be paid a salary in the seven-digit range, which includes benefits – decimal points don’t count in this discussion
38.
This type of data includes numbers with decimal part or fractional numbers
39.
The numbers are simplified a bit (rounded up or down to be fewer decimal places)
40.
Note that there are no decimal points involved in that last number
41.
value, that is a number separated with a decimal point (
42.
into the equation and eliminating decimal percentages
43.
We eliminated decimal percentages by using the
44.
This is a factor set up as (1 + Decimal
45.
the decimal areas, 0
46.
the rank (with a decimal) and the next rank up is eliminated in favor of the divided rank
47.
decimal system, also called base 10
48.
It’s much simpler now with decimal money
49.
Our calculations this time however, seemed far more to the decimal place as on our arrival, Giresun was thankfully sailor-free and the very first hotel surely had the starchiest sheets to be found in Asia Minor
50.
From this profit forecast they calculate a valuation to four decimal
51.
What is the decimal form of ¾ %?
52.
as a number of years including decimal fraction of a year
53.
We’ve seen in a previous section that with the EU odds, the wager is included in the decimal number
54.
Also… you cannot use any other mathematical symbols or values or numbers when it comes to correctly describing the Infinite Universe as a Totality except as a split organic fraction; not as a decimal fraction
55.
this is the reason why literally all scientific measurements that try to be exact: end up in insane decimal fractions that never end, and cannot be simplified
56.
This is why the value of Pi is an endlessly repeated decimal fraction of a vicious cycle
57.
Humans created the 10-root decimal system of mathematics because we have 5 digits on each of our two hands… which adds up to the number 10
58.
Pets are pets, no matter what size! (I called the ad and asked if the decimal point was at the wrong spot and she said “goodness no!” and I wished her good luck and then hung up
59.
It is the imaginary, abstract measurement of absolutes: using fractional equivalents turned into decimal fractions, comparing apples to oranges: in terms of accumulation
60.
numbers before and after the decimal in quatrain number 10
61.
They could easily have big establishments whole thing quite painless out of all the taxes give every child born five quid at compound interest up to twentyone five per cent is a hundred shillings and five tiresome pounds multiply by twenty decimal system encourage people to put by money save hundred and ten and a bit twentyone years want to work it out on paper come to a tidy sum more than you think
62.
” If the trader is reasonably sure the person he is speaking to knows the approximate price, he may drop the handle (the whole number) part of the price and just give the decimal pricing
63.
It is not economically feasible, or time practical to be caught up in the exact figures, carried out seven decimal points
64.
writes the date value as a week number in decimal format using the W algorithm
65.
d displays SAS time values as hours and decimal fractions of hours
66.
d is the number of decimal places to the right of the hours, and w must be greater than d+1 to account for the decimal point
67.
If you do not specify any decimal places, SAS rounds to the nearest hour
68.
0 Only one decimal place for tenths of seconds, because there is not enough space to fit two
69.
A w of 8 only leaves enough space for a d of 1 because of the decimal point
70.
w can be from 2 to 20, with a default of 8, while d indicates the number of decimal places to the right of the seconds
71.
w must be greater than d+1 to account for the decimal point
72.
d will print decimal fractions (e
73.
format in that it displays seconds as opposed to decimal fractions of minutes
74.
Note the rounding to the nearest second, which causes the displayed result to be rounded to the nearest minute when there isn't enough room for the decimal
75.
%H Hour (24-hour clock) as a decimal number (0–23), with no leading zero
76.
%I Hour (12-hour clock) as a decimal number (1–12), with no leading zero
77.
%j Day of the year as a decimal number (1–366), with no leading zero
78.
%M Minute as a decimal number (0–59), with no leading zero
79.
%S Second as a decimal number (0–59), with no leading zero
80.
%w Weekday as a decimal number, where 1 is Sunday and Saturday is 7
81.
%y Year without century as a decimal number (0–99), with no leading zero
82.
also reads packed decimal RMF records, RMFSTAMP8
83.
It reads times and interprets them based on colons and decimal points
84.
If there is a decimal point, the value following the decimal point is translated as a decimal fraction of seconds
85.
It can read time values in the following formats, where hh corresponds to hours, mm corresponds to minutes, ss corresponds to seconds, and ff corresponds to decimal fractions of seconds
86.
60 The decimal point causes the translation to be ss
87.
03 One colon, and a decimal point is translated as mm:ss
88.
74 Two colons and a decimal point, and the translation is hh:mm:ss
89.
ff indicates decimal fractions of seconds and must be separated from the seconds by a decimal point (
90.
Both seconds and their decimal fractions are assumed to be zero if they are not present
91.
The time follows, where hh represents hours, mm represents minutes, ss represents optional seconds, and ff represents optional fractional seconds, which must be separated from the seconds by a decimal point (
92.
If there is a single decimal point and one or more colons (for example, 12:06
93.
5), the value following the decimal point is translated as a decimal fraction of seconds, and the value preceding the decimal point is considered to be seconds
94.
If there are multiple decimal points (for example, 15
95.
d writes time values in the ISO 8601 basic time notation hhmmssffffff, where hh represents zero-padded hours, mm represents zero-padded minutes, ss represents seconds, and ffffff is decimal fractions of seconds
96.
The format writes the adjusted local time in the ISO 8601 basic time notation hhmmssffffff+|–hhmm, where hh represents zero-padded hours, mm represents zero-padded minutes, ss represents seconds, and ffffff represents decimal fraction of seconds, which is then followed by the time offset
97.
ffffff+/-hh:mm, where hh represents zero-padded hours, mm represents zero-padded minutes, ss represents seconds, and ffffff represents decimal fraction of seconds, which is then followed by the time offset
98.
d displays SAS time values without any adjustments using the ISO 8601 basic time notation hhmmssffffff+|-hhmm, where hh represents zero-padded hours, mm represents zero-padded minutes, ss represents seconds, and ffffff represents decimal fraction of seconds, which is then followed by the time offset from Coordinated Universal Time (UTC)
