1.
He no longer felt the need to confine his online activities to his bedroom and had spent many a happy evening hour running cables around the house and setting up a new wireless router
2.
We've got a router at Telehouse, a Moorhen
3.
female sockets of the router that Angela had
4.
router, and through the massive connection
5.
"Jeez!" said Angela, raising her arm in protection as another router blew its fascia across the room
6.
map is the phone number of the remote router, not the local one
7.
The router will accept that command without the "broadcast" option, but routing
8.
In OSPF, the hub must become the designated router (DR)
9.
that formed across the ISDN link will be assumed by the router to still be up
10.
you can understand how a router or switch operates
11.
just explaining the theory and that give you a lot of explanation of router configs and
12.
We'll configure IGRP on R1, R2, and R3 with the router igrp 1 command
13.
The “1” in the router igrp command refers to the Autonomous System (AS)
14.
Many of the Cisco router features that can use loopbacks are
15.
on a router is down, that means the router is unavailable as a whole
16.
In contrast, a physical interface being down does not mean the router itself is out of
17.
that router are still operational
18.
router, but if you do the proper research before starting the password recovery process,
19.
The router must first be rebooted and a “break” performed within the first 60 seconds
20.
used to access the router, but is the usual key combination
21.
Reload the router with the letter i
22.
This particular config register setting will cause the router to ignore the contents of
23.
When the router reloads, you’ll be prompted to enter Setup mode
24.
copy run start, and then run reload one more time to restart the router
25.
horizon states that a router cannot send an advertisement for a route out the same
26.
Running show ip eigrp route on each router shows that R1 has a route for both R2’s and
27.
A Cisco router is a DTE by default, but directly connecting two DTEs with a DCE/DTE
28.
just go over and look at the DTE/DCE cable to see which router had the DCE end of the
29.
How can we tell which router has the DCE end of the cable attached?
30.
) The router with the DCE
31.
Using TFTP in this fashion is a great way to have backup copies of IOS images or router
32.
Before we worry about the router connectivity, let's make sure the trunk link is
33.
"He wasted most of Monday trying to fix an automatic router, and when he couldn't they sent for the expert
34.
the ADSL router unit, then reconfigured all over again
35.
‗The modem and router are standard with wireless connections to both this computer and yours in your bedroom
36.
really try a wireless router -- see our article 'Create Always-On Networks with a
37.
Create Always-On Networks with a Wireless Router
38.
So what should you do about it? Well, a wireless router is the answer to your
39.
What is a Wireless Router?
40.
A wireless router is basically a small, low-powered computer dedicated to nothing
41.
wireless router, you can connect any of the computers on your network to the
42.
When you're choosing a wireless router, you should consider the same things as
43.
Remember, though, that speed is far more important with a router than it is with
44.
should be a matter of plugging the router into the power supply and then
45.
router instead of Internet Connecting Sharing at least lets you use these functions
46.
switch them all over to wireless networking at once, installing a wireless router is
47.
In this way, it works a lot like a wireless router: basically, a
48.
wireless access point is to a wired LAN as a wireless router is to the Internet
49.
computer technology required in a router or an access point, they are relatively
50.
wireless router or access point, but once you've done that you can set up
51.
This removes all your settings and makes the router or access
52.
'profiles' (kinds of devices that could, in theory, be Bluetooth enabled), it includes For more wireless router advice visit http://wirelessrouterdeals
53.
He reported to the hotel manager that the firmware upgrade he had just made to the router, would speed up the broadband connection, and then left the hotel
54.
Gupta plugged the computer into the mains socket and a router, to connect to the internet, and woke it from sleep mode
55.
“But, somehow, this person has gained access through my wireless router and has taken Administrator control of the computer
56.
“Can we shut down the router?”
57.
router for the office wireless
58.
keyboard and mouse, and a headset, router and
59.
“Where is our router?” I thought I could handle this
60.
“I need your help with the router
61.
) The router itself is connected to the internet via a satellite
62.
Typically, wireless network has one or more computers that connect to the Internet via an access point, which is typically a type of router that is the gateway for the computers on the network to connect to the Internet
63.
Many companies and individuals work wirelessly and it has become more popular because it does not require your computer to be wired to an Internet connection, but operates by wireless signals to the router
64.
whether with a router or a circular saw, be sure you don't
65.
NOTE: If you don’t have a router, you can still put
66.
Plugging in the ethernet cable that connected to the nearby router, he waited for the connection symbol to appear on the screen in front of him
67.
Tor stands for The Onion Router
68.
As I have stated before, the only thing smart about a smart router is that it is smart for your broker to make the most money
69.
The only thing behind it was a row of ten Ethernet cable ports—just like those on the back of our cable router at home
70.
• Routers A router is a device that connects two LANs to form an internetwork
71.
Like a bridge, a router forwards only the traffic that is destined for the connected segment, but unlike repeaters and bridges, routers do not forward broadcast messages
72.
Any computer on one of the LANs can communicate with the other LAN by directing its traffic to the local router, which relays it over the WAN link to the other site
73.
The addresses used at this layer are the hardware (or MAC) addresses that in most cases are hard-coded into the network interface of each computer and router by the manufacturer
74.
When a packet travels through a large corporate internetwork or the Internet, it is passed from router to router until it reaches the network on which the destination system is located
75.
Each router is responsible for determining the next router that the packet should use to take the most efficient path to its destination
76.
An intermediate system is a router or switch that connects two or more networks and forwards packets on the way to their destinations
77.
If the destination is on a distant network, the intermediate system consults its routing table to select the router that provides the most efficient path to that destination
78.
This is the job of a router
79.
You can, for example, connect an Ethernet network to a Token Ring network because packets entering a router are stripped of their data link layer protocol headers as they pass up the protocol stack to the network layer
80.
After processing, the router then encapsulates the PDU in a new data link layer header using whatever protocol is running on the other network to which the router is connected
81.
To make communications between the networks in the two offices possible, each must connect its LAN to a router, and the two routers are linked by the WAN connection
82.
In a slightly more complicated arrangement, a site with a larger network may have several LANs, each of which is connected to a backbone network using a router
83.
These two examples of router use are often combined
84.
This means that another router is needed to support some type of WAN connection to an Internet service provider (ISP)
85.
The basic function of a router is to evaluate each packet arriving on one of the networks to which it is connected and send it on to its destination through another network
86.
The goal is for the router to select the network that provides the best path to the destination for each packet
87.
Each router on a packet’s path is referred to as a hop, and the object is to get the packet where it’s going with the smallest number of hops
88.
The router forwards packets by maintaining a list of networks and hosts, called a routing table
89.
When the router receives a packet addressed to a workstation on Network 3, it looks at the network identifier in the packet’s destination address, compares it to the routing table, and forwards it to the network with the same identifier
90.
This is a rather simple task, as long as the router is connected to all of the LANs on the network
91.
When a network is larger and uses multiple routers, however, no single router has direct knowledge of all the LANs
92.
In Figure 4-12, Router A is connected to Networks 1, 2, and 3 as before and has the identifiers for those networks in its routing table, but it has no direct knowledge of Network 4, which is connected using another router
93.
How then does Router A know where to send packets that are addressed to a workstation on a distant network? The answer is that routers maintain information in their routing tables about other networks besides those to which they are directly attached
94.
On a private network, it is not uncommon for every router to have entries for all of the connected networks
95.
Thus, a router connected to the Internet sends packets to another router that it thinks has better information about the network to which the packet is ultimately destined
96.
• Gateway Specifies the IP address of the gateway (router) the system should use to send packets to the network address
97.
0, the system must send packets to a gateway (router) with the address 192
98.
This way, if any one router should fail, all of the systems can still send traffic to any other system on any network
99.
Most of the time, the efficiency of a particular route is measured by the metric value because each hop involves processing by another router, which introduces a slight delay